A Guide to Replacing Your Garage Door Springs: Enhancing Safety and Efficiency
Posted on: 5 October 2023
Garage doors play a crucial role in keeping your cars and homes safe. However, with regular use, it is normal for the springs of the garage door to wear out or break. When this happens, it is important to replace them immediately to avoid accidents and further damage. This piece will explore how to replace your garage door springs and the benefits of using new springs.
Step 1: Safety First
Safety should always come first when replacing garage door springs. Be sure the garage door is closed and disconnected from the opener. Also, release the tension on the old springs before removing them. You can do this by using a winding bar and turning the spring until the tension is released. Always wear safety glasses and gloves.
Step 2: Choosing the Right Springs
Choosing the right garage door springs can make all the difference. The best way to ensure you select the right garage door spring is by measuring the old springs. When selecting new springs, ensure they match the old springs’ length, wire size, and number of coils. If you have difficulty measuring, consult your garage door manufacturer for assistance.
Step 3: Removing the Old Springs
Remove the old springs from the garage door. Use a winding bar to hold the spring in place and loosen the nuts holding it. Disconnect the spring from the pulley and remove it from the torsion bar completely.
Step 4: Installing New Springs
Install the new springs in place with the help of a winding bar. Twist the springs onto the torsion rod and attach them to the center bracket. Use the winding bar to tighten the new spring. Ensure that the spring is balanced and correctly tensioned.
Step 5: Test the Garage Door
After replacing the springs in your garage door, test the door to see if it operates correctly. Open and close the door a few times, checking if it’s balanced. If the door is balanced, then it’s ready to use.
Benefits of Using New Garage Door Springs
- Safety: The garage door springs control the door's movement; using old or worn-out springs can make the door become unbalanced or cause accidents. Using new springs ensures the door operates correctly, reducing the risk of accidents.
- Saves money: New springs are more reliable and long-lasting, meaning you don't need to replace them frequently. This saves you money in the long run.
- Increases efficiency: New springs work more efficiently, reducing wear and tear on the other parts of the garage door. This means the door will operate smoothly, meaning it requires less maintenance.
Replacing an old or broken garage door spring is a pivotal step in maintaining the safety and proper functioning of your garage door. Remember always to prioritize your safety during installation. By following the steps provided in this guide and using new springs, your garage door will operate smoothly, efficiently, and safely.
If you'd like to learn more about new garage door springs, contact a professional near you.
Share